The fiber cement boards of Shin Kwang are now distributed in various countries in Asia, Europe, the USA and the Korea, Taiwan etc.

SHINKWANG believes in ensuring product quality and sustaining customer satisfaction. Since 2003, the company has been certified with MS ISO 9001,2000 for the "Manufacture of Fiber Cement Sheets (Smooth and Textured) and Fiber Cement Molded products".

The customers of Shin Kwang are assured of good quality products as well as caring after-sales service and continuous support from its experienced staff. Shin Kwang 's ultimate aim is the achievement of excellence in the products and services it offers. Shin Kwang welcomes and treasures feedback from its customers; such feedback forms the database for its continuous development programmed to create new, innovative and improved products and services that best serve its customers.

SHIN KWANG FACTORY Located in Zhe jiang Province of China . Spreads a total area of 38,000 square meters and 26000 square meters of floor area with a fixed asset of USD 616,000,000. SHIN KWANG, under technological cooperation with shanghai University, is committed to the development to the development of environment protective construction material. With 4 production lines respectively producing High Density Cellulose Fiber Reinforced Cement boards and High Density Cellulose Fiber reinforced calcium silicate boards as well as 7000,10,000-ton presser and high-pressure kettle, SHINKWANG reports an annual productivity of 15,000,000 square meters.

SHINKWANG boards have a high technological content and are recognized as the provincial scientific and technological Novelty. The products are tested by the National Cement and Concrete Products Inspection Center as well as the national supervising & Inspection Center for Permanent Extinguishing System and Quality of Fireproof Parts.

The enterprise, which has passed ISO9001:2000, is supplying markets in the US, Australia, Malaysia, South Africa, England, Singapore, Maldives, Middle East, Israel, South Korea, Hong kong , Taiwan and so on.

Brief Introduction of the Products

SHINKWANG CRC Boards take the major ingredient of high-grade fiber and mineral substance and are molded with the world's most advanced technology before specially treated under high-temperature and high-pressure.

Specifications

Size : 2440 * 1220 / 910*1820 / Optional surface sanding / Other optional Size available

Thickness (mm): 4T / 5T /6T / 8T /9T /10T / 12T/Other Thickness are Available

Main materials : Cellulose Fiber, Portland cement , Refined quartz sand & Water

Density (g/cm? : 1.4 -1.8

Bending strength (M/mm? : Above 11.8

Breaking load : Above 236

Adiabatic ability (w/m?) : Below 0.188

Rate of length change (wetting %) : Below 0.16

Non flammability : Fire proof 1 st grade

Major Features

1、Good fireproof performance　　　

2、Ideal anti-moisture performance 　　　

3、Long durability　　　　　　　　

4、High intensity　　　　　　　

5、Permanent size　　　　　　　　

6、Heat insulation & sound insulation

2、Suspended Ceilings

3、Acoustic walling　　　　　

4、Acoustic Ceilings

The Installation of Wall

1、Along top keel 2、Along floor keel 3、Horizontal keel 4、Vertical keel

5、Tapping screw 6、CRC boards

Installation Methods

1. Light steel keel frame

1)Draw the installation guideline.

2)Use the shooting nail or expansion bolt to fix the along top keel the along

floor keel on the ceiling and floor.

3) Arrange the vertical keel(usually 612mm) as per request and install

the horizontal keel.

2. Fixing method of the board

1) To cut the board as per the required size which is 10mm shorter than

the wall height.

2) The boards should be fixed on the keels with the tapping screws

leaving interlaced gaps, the distance between tapping screws is 200-250mm.

and each screw head should enter 0.5mm depth into the board.

3) Please leave a gap about 4mm in width between boards.

4) When fixing the board, it should be mounted from its center to the edges.

Don't fix it at different points at the same time.

Avoid the over bending of the board.

5) Before fixing we can place the mineral wool or glass fiber into

the empty space between the boards to get the better soundproofing and

fireproofing effects.

Caution of Storage, Transportation and Other ItemsStorage

1.Our boards will be dehydrated before delivery, so we should place

it on the flat dry warehouse ground.

2. Each pallet of them should be covered with the tarpaulin or put into the nylon bag.

3. In the storage place of our products we should avoid the edges and angles being damaged

by the automatic and artificial operations.

4. Can not put the boards vertically.

5. The height for each pallet of products is 1.2m; If you want to pile up

the pallets then the total height of them should be less than 3.0m.

Transportation
When you load and unload it or install it you should carry and put is

carefully so as to avoid the edges, surfaces and angles being damaged

meanwhile we should not over bend it in order to protect it.


Cutting


Just like cut wood and the other building materials when you use

the electrical cutting tool cut our products it will cause the flying dust

and powder, so the worker must wear the gauze mask, the working site

should have ventilation and should clean up the dust after working.